Status
Available
Description
Titebond Cold Press for Veneer is a high-quality, economical alternative to contact cement for large-scale bonding of veneers to flat surfaces. It is specifically formulated for cold press laminating of wood to solid woods, particleboard, MDF, plywood and other porous materials.
Titebond Cold Press offers a moderate speed of set, a translucent glue line and contains none of the harmful or corrosive fumes typical of most contact cements. It also prevents bleed-through on open-grained and unbacked wood veneers.
Features:-
Physical Properties:-
Application Temperature
Above 10 °C.
Open Assembly Time
15 minutes (21 °C./50% RH)
Total Assembly Time
15-20 minutes (21 °C./50%RH)
Minimum Required Spread
Approximately 6 square meters per litre
Required Pressure Application
100-250 psi, depending on substrates
Method of Application
For most consistent coverage a mechanical spreader is recommended.
Cleanup
Damp cloth while glue is wet. Scrape off and sand dried excess.
Technical Data:-
- Economical alternative to contact cement
- Formulated to minimize 'bleed-through"
- Moderate speed of set
- No harmful vapors
- Safe – nonflammable
| Type | Modified PVA Emulsion |
| State | Liquid |
| Colour | Tan |
| Dried film | Dark Brown |
| Solids | 42% |
| Viscosity | 4,500 cps |
| Storage life | 12 months in tightly closed containers at 21 °C |
| Calculated VOC | 2.0g/L |
| Weight per gallon | 4.17kg |
| Chalk temperature | Approximately 10 °C |
| Flashpoint | >93 °C |
| Freeze/thaw stability | Stable |
| pH | 4.9 |